0 items: $0.00
Sort by:

7 Item(s)

per page
Much better then China! Review by Fyathyrio
Overall Rating
While this cable may cost about twice as much as China ebay ones, it's at least twice as good and worth the extra cost. The plugs on this cable have good support and protection around the battery connectors, while the cheap ones from overseas do not support or protect the plugs, which can lead to the pins coming out, poor battery connections, and make it harder to attach the batteries. With over a dozen 1s lipos to charge, having this cable is a must, and coming with banana plugs alread installed saves me the trouble of soldering on some or getting an adapter to attach this directly to my charger. (Posted on November 9, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)
 
Inappropriate review? Report it
Looks good, works better Review by Fyathyrio
Overall Rating
This and a high output charger are a must for parallel charging large packs. Provides all the power my 30A iCharger 3010B needs with room to spare for one or two 106Bs to keep all my single and multiple cells pack charging while I'm still flying. I've not verified the ammeter, but the voltmeter is within 0.1VDC of my multimeter & charger input reading. This has all the benefits of converted server power supplies with none of the drawbacks. The fans only run when needed, and they aren't so loud as to prevent hearing the phone or TV. The case looks good sitting on the bench, and no exposed terminals. The 14AWG 120VAC power cord provided is a little stiff, but doesn't get warm under heavy use which is nice. (Posted on October 8, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(4 of 4 people found this review helpful)
 
Inappropriate review? Report it
Must have Review by Fyathyrio
Overall Rating
If you own more then 2 batteries, then parallel charging is the way to go! This is a solidly built board, with good connectors that takes the 30A my charger puts out with ease. (Posted on October 8, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)
 
Inappropriate review? Report it
Must have Review by Fyathyrio
Overall Rating
Get at least 2 of these and enough batteries to fill them. Waiting for my batteries to charge using the USB single slot charger provided with my Blade Nano QX was horrible, this allows me to fly through as many batteries as I want without delays. (Posted on October 8, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
Nice for field use Review by Fyathyrio
Overall Rating
I picked this up to compliment my workhorse iCharger 3010B. I often go through a dozen or more 1S batteries in my Nano QX or home built frankenquads, so having a second charger to help keep those batteries ready for flight ops is great. The small size makes taking this out in the field easier also. The downside of parallel charging so many 1S cells is sometimes the 10 amp limit can be a bit low for my needs...but I suspect not many people need to charge twenty 500 and 600 mah cells at one time! My fault for not getting a 206B.

My only complaint is the internal voltmeter and displayed voltage is low by ~0.05v as compared to my 3010B and my variety of multimeters. This results in my 1S cells not getting a full charge as it stops @ about 4.15v...but when balance charging larger cells it reaches the correct total and per cell VDC...but displays a high voltage. (Posted on October 8, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(3 of 3 people found this review helpful)
 
Inappropriate review? Report it
Buy once, cry once Review by Fyathyrio
Overall Rating
Doing the math on parallel charging six 2.2ah 3S lipos, it was obvious I needed a high amp charger with many features to complete the charge process in a reasonable time. This charger fills the need easily and has plenty of room to grow with me as my involvement in RC grows. Always gets my batteries within 0.01v when balancing, and even does a great job when doing the dozen or so 1S lips for my Nano QX. The small size and extra features are nice also, the motor test function makes diagnosing motor issues a breeze. (Posted on October 8, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
Good stuff Review by Fyathyrio
Overall Rating
Gives better performance in all areas over E-Flite 35C 160mah batteries in my Blade Nano QX. After well over 50 cycles, still running strong. Leaves Turnigy Nano-tech in the dirt! (Posted on October 8, 2013)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
A subsidiary company of Trans Yue International Trade LLC.