0 items: $0.00
Sort by:

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3
Awesome flight controller! Review by Kenneth - Pakratt76
Overall Rating
I have 3 of these now, and even on the very first one,
I found it real easy to set up and tune. And I didn't
know the first thing about these, other than I needed
a flight controller for my Diatone A450 frame I bought.
All 3 controllers have been flawless.


I started at first with OpenPilot GCS 15.02 software,
and then when I got my 2nd cc3d controller, I started
using LibrePilot GCS 15.09.... The "wizard" in both
programs is a snap to use! Takes a lot of guess work
out for the new guy... LibrePilot and OpenPilot software,
for the most part look and operate basically the same,
just whereas LibrePilot is a cc3d-supporting software
that took over as the OPenPilot stopped supporting the
original cc3d controllers.

I'm happy I went with this controller...

Using these on:
Diatone A250
Diatone A450
ZMR-210






(Posted on January 14, 2016)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
Nice 450 frame! Review by Kenneth - Pakratt76
Overall Rating
This was my 1st copter build.
(a friend of mine threw 4 motors and a 4in1 esc at me, and told
me to buy a frame, flight controller, and some props, and learn quads)
--- best "push" I've had in a while! and glad I purchased this!

I built this back on October 9, 2015, and I haven't
managed to break it yet, but I've been through a "few" props..... ;-)
It's pretty tough, amazingly....

Frame was simple & easy to assemble... pretty strait forward...
Ample room for carrying things and installing esentials.


I have this copter flipping and rolling nicely when
I want to spice it up on flight mode 3, and then the
other two modes are more for cruising & hovering around...


Built Using:
Speedix CC3D controller running LibrePilot 15.09
Turnigy Aerodrive 2830-11-1000kv motors
Q-brain 20amp 4in1 esc w/bec
Gemfan 8x4 slow-fly props
3s-4000mah & 4s-4000mah glacier batteries (Posted on January 14, 2016)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
I like these! Nice small 16amp Opto ESC! Review by Kenneth - Pakratt76
Overall Rating
I built my first 250 quad a little over a month ago, with four of these, and I have roughly an average of 5 flights (sometimes more) a day for 30 days now.......

Even a month later, I still can't believe how small in size
these are, for what they can do....

In using these with my Kensun 2204-2300kv motors and Speedix CC3d controller, I have had zero issues with the motors starting up, or power fades. I'm really liking these a lot. Would not hesitate to get more if I do
another 250 quad.


Using these on a Diatone A250 plastic frame,
Kensun 2204-2300kv motors,
DAL 5040 props,
Speedix CC3d controller,
DAL 5v/12v PDB,
45C 3s-1800mah Glacier (Posted on December 24, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
Nice inexpensive 2204 motor! Review by Kenneth - Pakratt76
Overall Rating
I built my first 250 quad a little over a month ago, with these, and I have roughly an average of 5 flights (sometimes more) a day for 30 days now.......

These motors seem to be holding up really well.... power is great, they never fail to spin up... I haven't noticed any excessive noise, or weird vibrations coming from these.

I've hit these into some trees and other things and the main shaft's haven't bent... they are of decent quality for this price...

Using these on a Diatone A250 plastic frame,
Kensun 16amp blheli escs,
DAL 5040 props,
Speedix CC3d controller,
DAL 5v/12v PDB,
45C 3s-1800mah Glacier (Posted on December 24, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)
 
Inappropriate review? Report it
Smooth, Nice Power, Durable. Review by Kenneth - Pakratt76
Overall Rating
I built my first 250 quad a little over a month ago, with these, and I have roughly an average of 5 flights (sometimes more) a day for 30 days now.......

These motors seem to be holding up really well.... power is great, they never fail to spin up... I haven't noticed any excessive noise, or weird vibrations coming from these.

I've hit these into some trees and other things and the main shaft's haven't bent... they are of decent quality for this price...

Using these on a Diatone A250 plastic frame,
Kensun 16amp blheli escs,
DAL 5040 props,
Speedix CC3d controller,
DAL 5v/12v PDB,
45C 3s-1800mah Glacier (Posted on December 24, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
Nice little 250 frame! Review by Kenneth - Pakratt76
Overall Rating
This is a nice light 250 frame... I'm glad I bought this one for my first 250 sized quad.....

This little guy takes a beating and keeps going!

When I set it up, I found it a little tight to put
everything under the "roll cage" top, so what I ended up
doing is putting my esc's on the tops of the arms, and my DAL 5v/12v PDB and extra wiring under the cage, and my speedix CC3d controler that has the hard case on top of the roll cage...
my futaba 6ch rx is on the rear plate behind the top cover.... I'm carrying my battery on the bottom of the frame, in which there were already
slots for a velcro strap to go though...... flies great....

I have an average of 5 flights a day (or more) for about 30 days now... totally happy with this purchase!!! It sure has given me a lot of enjoyment, especially for the pricing!


Built up Using:
kensun 2204-2300kv motors
kensun 16amp blheli escs
Speedix CC3D controller
DAL 5v/12v PDB
45c 3s-1800 Glacier
DAL 5040 props (Posted on December 24, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(1 of 1 people found this review helpful)
 
Inappropriate review? Report it
Super Tough Prop! Review by Kenneth - Pakratt76
Overall Rating
I've got so many flights on my first set of these props, I actually quit counting...... I've banged these into table legs, trees, the ground, and a myriad of other things....
Average of 5 flights a day for 30 days now.....

One Tough Prop! I can't stress that enough!
(perfect for a quad-newbie of 3 months like myself)

The lift/pull from these props are great... I'm hugging around trees, doing low altitude flips/rolls, and the recovery is just great..... (Using these with BuddyRc's new Kensun 2204-2300kv motors & kensun 16amp blheli escs) (Posted on December 24, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
One Tough Prop! Review by Kenneth - Pakratt76
Overall Rating
I've got so many flights on my first set of these props, I actually quit counting...... I've banged these into table legs, trees, the dirt/ground, and a myriad of other things.... Average of 5 flights a day for 30 days now.....

One Tough Prop! I can't stress that enough!
(perfect for a quad-newbie of a couple months like myself)

The lift/pull from these props are great... I'm hugging around trees, doing low altitude flips/rolls, and the recovery is just great..... (Using these with BuddyRc's new Kensun 2204-2300kv motors & kensun 16amp blheli escs) (Posted on December 24, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
(1 of 2 people found this review helpful)
 
Inappropriate review? Report it
Moves air! Review by Kenneth - "Pakratt76"
Overall Rating
Upon removing the prop out of the package, I was surprised that this prop wasn't actually heavier in weight.

It seems that it is well made, just as well as any APC prop that I have ever used in the past.

This prop was pretty close to being a perfect on the prop balancer before I did anything to it...

Caution -- it is extremely sharp on the trailing edge of the blades...

I chose to lightly sand the trailing edges of the prop down a little as they were like a plastic salad knife that you would see on an infomercial...

Even after smoothing out the sharp edges, I had to barely re-balance.

Happy with it so far...

Moves some good air on the front of my electric plane...
Time will tell as to if it will hold up to duration...
I'm pretty sure it will.....

Would buy another... (Posted on March 3, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
My favorite hat! So comfortable and cool..... Review by Kenneth - "Pakratt76"
Overall Rating
This hat is constructed very well.
I love how this hat fits my head... in fact,
it's about the only hat I wear anymore when
out flying.....

It's definitely literally the "coolest" hat I wear...
being that it is white, which I do love, it doesn't bake
my skull when out in the sun at the field enjoying
a nice 90 degree flying day!

As I saw in another review, yes, it is a great conversation opener.... I get the same question time
and time again... "What or Whom is BuddyRC"..... (Posted on March 3, 2015)
Would you recommend this product to a friend? Definitely yes

Share this review
Do you find this review helpful?  Yes No
 
Inappropriate review? Report it
A subsidiary company of Trans Yue International Trade LLC.