**CHIPS SWAP MEET** Factory Refurbished iCharger 106B

**CHIPS SWAP MEET** Factory Refurbished iCharger 106B

** CHIPS SWAP MEET ** X Aircraft SuperX Multirotor Controller Standard Version

** CHIPS SWAP MEET ** X Aircraft SuperX Multirotor Controller Standard Version

**CHIPS SWAP MEET** Factory Refurbished.Sky RC Ultimate 200W X2 10A Balance Charger

Special Price $75.00 was $109.00
Availability: In stock
SKU
CSM-U200X2

This is an overstock sale on a limited quantity of Factory Refurbished iCharger 106B+ chargers, these are tested prior to shipping and are sold as is.  Comes as you see it in picture.


Specifications: Operating voltage range:DC 12.0~18.0 Volt Circuit power:Max. Charge power 2x200Watts Max. Discharge power 2x25Watts Charge current range:0.1~10.0A Discharge current range:0.1~5.0A Current drain for balancing Li-Po/Ion/Fe:200mA/cell Li-ion/Fe/Polymer cell count:1~6cells NiCd/NiMH battery cell count:1~15cells Pb battery voltage:2V~20V Net weight:740g Dimension:200x135x57mm
Special features Optimized operating software Ultimate 200W×2 features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer Ultimate 200W×2 employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging During the process of discharging, Ultimate 200W×2 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery Ultimate 200W×2 is adaptable to various types of lithium batteries, such as Li-Ion, LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery Purposes to charge Lithium battery varies, fast charge reduce the duration of charging, whereas store state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Maximum safety Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
Capacity limit The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold The batteries internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. This function is available by connecting temperature probe, which is included in the package.
Processing time limit: You can also limit the maximum process time to avoid any possible defect.
Data store/load For user’s convenience, it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge. These data can be called back at any time you need and the process can be executed without program setting.
Cyclic charging/discharging 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the batteries activity.
PC based analysis using USB Communication (For output 1 only.) The Ultimate 200W×2 is fitted with a mini USB port on the front side of the case; a USB cable(not included) can be connected to this socket in order to link the charger to a PC. “Charger Monitor” program enable you to view graphs of charge and discharge curves, with a capacity, voltage, temperature and ampere display, and individual curves can be individually suppressed or superimposed to allow a visual comparison of the data. “Charger Monitor” software can be downloaded from our website. USB Power Supply The USB power supply can provide 5V, 1A continue current. You can power your mobile phone, digital camera or even iPod via the USB power supply.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account