CellLog 8S Battery Monitor & Data Recorder
CellLog is a multi-functional, highly precise voltage meter, weighing only 0.63oz/18g. It tells you not only the voltage of individual cells in the mV range, but also the total voltage of a battery pack, the highest and lowest voltage, voltage difference between cells. Various alarms can also be setup with this little handy gadget. The 8S version has logging function. It can be used as a voltage data recorder for your operating RC models. The 8M is a simplified version of 8S. It works and looks exactly the same as 8S except the lack of logging function. 8M does not have the USB port. The pins of both 8M and 8S are JST-XH compatible. A proper adaptor may be required for ThunderPower, Hyperion, and Kokam type batteries.
Small size with multiple functions; backlight 128x64 lattices LCD and Buzzer Tone Reminder; easy to use.
CellLog 8S measures not only the individual cell voltage of 2-8S lithium batteries, but also the voltages of NiMH, NiCd, Pb-Acid battery packs.
It can be set Individual Voltage Alarm and Pack Voltage Alarm, Overvoltage Alarm, Low Voltage Alarm, Differential Voltage Alarm and Time Over Alarm. Furthermore, the extra alarm output can be controlled by the user.
Eight sets of default monitor alarm settings, applicable to different battery packs.
Every single CellLog 8S product has been calibrated in the factory. It also supports manual calibration.
16 Mb flash memory for saving offline data up to 36 hours (only available for 8S).
Support firmware upgrade via the USB port. With the support of the software Logview that comes with the product, users can retrieve and analyze charging and discharging data from CellLog 8S. (for more information about Logview, please visit http://www.logview.info)