PowerLog 6S Multifunctional Power Analyzer
PowerLog 6S is a powerful gadget which serves as watt meter, cell voltage meter (measures at the mV level), tachometer, motor KV measurement, temperature measurement, pulse signal measurement, voltage monitor and alarm, and much more. It has a 16 MB flash memory that can store log data up to 33 hours. The real time data can be monitored and analyzed on a computer with a USB cable, or can be uploaded for offline analysis.
PowerLog 6S is powered by a 32-bit ARM micro processor, together with 12 bit A/D convertors to ensure accurate measurements.
PowerLog 6S weighs only 1 oz (28 grams). The size is only two third of a credit card, and the thickness is the same as a normal ball pen.
To learn more details about the product, please download the product manual here, or join the discussion on rcgroups.com.
one CD containing drive, manual, and Logview,
one USB cable,
one alarm output cable,
one brushless motor KV meansurement cable,
two 12 AWG cables with male and female T plugs,
one temperature sensor DS18B20,
two T plug protection rubber covers.
Input voltage range: 4.5 – 60.0VDC
Current measurement range: -130A – +130A（continuance -40A – +40A）
Cell voltage range: 0.05 – 28.0VDC
External temperature measurement range: -55℃– +125℃ (-67 F–+257 F)
Pulse measurement range: 10us–999999us
Steering gear pulse output range: 0–20ms (0.5us step)
RPM measurement range: 0–99999 RPM
Voltage display resolution: 1mV
Current loading of test: 12 mA
Maximum voltage for alarm port: 50 VDC
Current drain for alarm port: <500 mA
Log Files storage: 16 Mbit (33 hours at 2seconds logging interval)
Sample logging time interval: 0.25 – 60 seconds
PC Connect: USB port
Weight: 1 oz / 28 g
Dimensions (L X W X D): 85X40X13mm
3.34 X 1.57 X 0.51 inches
PowerLog 6S allows bidirectional current sensing, adopting 0.2 mΩ current sampling resistor with low insertion loss.
1 channel 0-60V voltage measurement. 6 channels cells voltage measurement (can not only measure 1-6S Li/ NiMH/NiCd/ Pb battery individual voltage, but also measure 6 channels 0.05-28V voltage).
4 channels temperature measurement (1 channel internal temperature measurement and 3 channels external temperature measurement).
Propeller RPM measurement, adopting non-contact optical sensing, user settable blade number.
Pulse signal measurement: frequency, period, pulse width, duty cycle. Applicable to remote control channel signal, measure, and monitor.
Steering gear driver output: manual and auto mode, auto mode is able to break in steering gear.
Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the interface can be operated smoothly.
It can be set Cells Voltage, Pack Voltage, Timer Over, Current, Power, Capacity, Temperature, RPM, Period and Pulse Alarm. What’s more, the extra alarm output can be linkage controlled by the users.
It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
PowerLog 6S has been 100% calibrated in the factory but it also allows manual calibration by the user.
The logging interval can be set according to users’ different needs. PowerLog 6S has a 16 MB flash storage, which can log offline data for 33 hours @2 seconds logging interval.
Upgrading the hardware program through the USB port is supported. Adopts to HID protocol, and PC driver can be installed by plug and play.
The PowerLog 6S also supports the “Logview” software and can display, plot, and analyze the charge and discharge data. (See detail information about logview in the following website: http://www.logview.info)