0 items: $0.00

SPC Maker 95X Brushless Mini FPV Quad DSM2/X Compatible_ On Sale!

SPC Maker 95X Brushless Mini FPV Quad DSM2/X Compatible_ On Sale!

SKU: SPC-9501
You will earn 125 Gold Points for buying this product

Availability: Out of stock

Regular Price: $150.00

Special Price: $125.00

The following items are frequently bought with this product

  • SPC Maker 95X Brushless Mini FPV Quad DSM2/X Compatible_ On Sale!
  • SPC Maker RotorX Gemfan 2" 2035 4 Blade Props 4 Pieces Clear Purple
  • Price: $3.49
SPC Maker 95X Brushless Mini FPV Quad, powered by F3 controller and 2S 500mAh batteries, and packed in nice portal bag for easy protection and transportation.
95X is an updated SPC Maker brushless FPV quad with thicker 3mm bottom carbon fiber plates.

Durable 3mm carbon fiber frame
Ominibus F3 flight controller integrated with OSD module
Frsky or DSMX compatible
SPC Maker 1104 7500KV brushless motors
Mini 4 in 1 BLheli_s ESC (2-4S LiPo), Dshot, Multishot supported
600TVL HD CMOS 1/4 inch camera
Programmable WS2812 LED Board
2 Sets Gemfan 2035 props
Two 7.4V 500mAh 30C lipo batteries
Packed in a nice carry case

Check description after the following photos for more details.

Brand name: SPC Maker
Product model: SPC 95X
Wheelbase: 95mm
Size: 76mm*87mm*23mm
Weight: approximate 60g (without battery)
Flight weight: 96g (Include battery)
Motor: SPC Maker 1104 7500KV brushless motor
ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: DSMX compatible
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Flight controller: OSD Ominibus F3 flight controller integrated with OSD module
OSD: Betaflight OSD
Firmware of flight controller: Betaflight_3.1.0_OMNIBUS
Flight time: 4-5minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 7.4V 500mAh 30C lipo battery

Flight controller parameters:
Ominibus F3 flight controller integrated with OSD module.
1.Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module (This is 6DOF version, no barometer and compass).
(1) Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller than 130mm to exhibits its advantages in small dimensions and multiple functions.
(2) It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting hole size is 20mm (2.5mm hole).
(3) Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3)
(4) STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed.
(5) Supports 2-4S LiPo input.
(6) Built-in 5V 1A BEC.
(7) Supports popular receivers such as SBus, PPM, DSMX.
(8) Buzzer, programmable LED, voltage monitoring, HLHeli ESC.

2.4 in 1 BLheli_s ESC:

Input voltage: 2-4S LiPo and 2-4S HV LiPo
BEC Output: Not available
Constant current of a single ESC unit: 10A
Maximum current: 15A 5 second.
Dimensions: 27*27mm (main board)
31*31.5mm (including soldering pads and extruded part)
Weight: 6.3g
Firmware: BLHeli_s
Supports D-Shot, Oneshot, rotation directions.
Processor: SILABS EFM8BB21F16G
Driver: new generation 3 in I MOS

Specification of Mini F3 flight controller tower:
Weight: 8g
Supported frames: smaller than 280mm
Constant current: 10A*4 (maximum current: 15A*4, 5s)

Camera parameters:
Frequency band: 5362-5945MH
Channel: 48
Modulation type: FM
Select channel: switch
Channel display: CH1-CH8 channel display with 8 LEDs, and A-F frequency group display with 6 LEDs
Transmit power: 13±1dBm
Frequency control: PLL
All harmonic: Max-50 dBm
Frequency stability: ±100KHz(Typ.)
Frequency precision: ±200KHz (Typ.)
Channel disk failure: 1dB
Antenna port: 50 Ω
Input format: NTSC / PAL
SENSOR: PAL: 720 × 540/NESC: 640 × 480 1/4 "
LENS ANGEL: H: 120 ° / V: 100 °
Baseband interface: P1, 27 * 2
Energy consumption: 200-215MA@5V DCIN
Supply voltage: 2.9-5, 5V
Operating temperature:-10℃ ~ + 60℃
Profile dimension: 14, 5 mm × 12, 2 mm + 14, 5 mm × 12 mm

Receiver Setup and Binding Methods
Quads with DSM Compatible Receivers
Binding method for Spektrum radios is through the CLI tab on Betaflight

Quads with FrSky Receivers
Binding methods for FrSky radios:
1.Select the D8 mode in X9D radio, and hold binding button of receiver at the time of powering it on. The LED should stay in solid. Then select “BIND” in radio. Binding is successful if the LED light of receiver goes off. Release binding button and power off receiver to exit binding mode. Receiver is ready to use after powered on.
2.For DJT and DFT modules, hold the button on module and power on radio, and the module is set in binding mode. Press and hold the binding button on receiver then power it on. Binding is completed if LED light goes off. Release binding button and restart receiver, and the system is ready for use.
3.For XJT module please select D8 mode by using the dip switch, and follow the above binding procedures.
Enable PPM output:
Short the solder pads of PPM on receiver board to enable PPM output. This can be used for flight controllers, wireless simulators, and wireless trainer radios.
Enable s.Bus mode:
Short the solder pads of s.Bus on receiver board to enable s.Bus output.
Failsafe setup:
Failsafe is assigned to channel 3 only, and cannot be defined by users. No matter what mix setup is used, please make sure throttle is assigned to channel 3.

Manufacturer No

Use spaces to separate tags. Use single quotes (') for phrases.

A subsidiary company of Trans Yue International Trade LLC.