West Michigan Park Flyers Yak55 Black and Red PAINTED
The version offered by Buddy RC is a red and black paint scheme not as pictured, pictures will be updated upon arrival.
This plane has been a hit everywhere it flies! It's great for both those just learning to fly or 3D and the pro flyer.The Yak flies like its' depron brother, but has the "bounce-ability" of EPP. This plane was designed by Leadfeather from RCGroups, and is being made available through WMPF with his permission. Be sure to check out the forum here and the build guide here.Yak 55 Attributes: Durable & easy to repair Easy to hover Ability to fly in tight quarters 3D capability Wing Span: 32.5 All up Weight: 6.5 to 7oz Standard Foam With Spars Short Kit: This option has foam parts with spar grooves cut in, hinges beveled and glued. All control horn slots as well as trussing slots are laser cut. The Carbon fiber spars are included and glued in. All the carbon fiber control rods, piano wire, wood control horn package as well as your choice of motor mount is included in the kit. This kit has foam Gussets for stiffening instead of trussing. This is a complete airframe kit ready to build, less electronics. This option can be ordered in a painted or unpainted airframe. West Michigan Park Flyers Gets You In The Air FASTER! WMPF does more pre-assembly for you to get you in the air much faster than anywhere else! The parts are all cut by CNC laser from 9mm #1.3lb EPP and have alignment tabs for easier building. The kit has of all the foam pieces pre-cut, control surfaces pre-beveled and hinges glued. The aileron servo cutout in the fuselage for a 9 gram servo is pre-cut to speed assembly. The wing spar slot is pre-cut into the bottom of the wing and elevator. The spars are installed for you for all but the foam only kit options. All Hinges and Spars are glued with Beacon Foam Tac Glue.