0 items: $0.00

ZTW BEAST 1:8 SL 120A Combo 4P SS 3674

ZTW BEAST 1:8 SL 120A Combo 4P SS 3674

SKU: ZTW-411203035

Be the first to review this product

You will earn 67 Gold Points for buying this product

Availability: Out of stock

$67.50

ZTW BEAST 1:8 SL 120A Combo 4P SS 3674

Combo set contains:
4P SL 3674B 3.5D 2150KV Motor - 1 piece
1:8 Beast SL 120A ESC - 1 piece
LCD Program Card - 1 piece
Cables - 2 piece

POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION
The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
1. Switch your Transmitter ON and set the throttle stick to its maximum position.
2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
ENTERING THE PROGRAMMING MODE
1. Switch your Transmitter ON and set the throttle to its maximum position.
2. Connect the battery pack to the ESC.
3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step

Product weight: 660.00 grams
Factory description: Miscellaneous All ZTW Beast Waterproof Competition Brushless SL120A ESC / Motor ( 4P SL 3674B 3.5D 2150KV ) Combo Set For 1/8 RC Car by ZTW
Manufactured by ZTW
Manufacturer number: ZTW/411203035
Manufacturer No

Use spaces to separate tags. Use single quotes (') for phrases.

A subsidiary company of Trans Yue International Trade LLC.