Lemon Rx DSMP 6 Channel Full Range Receiver with Diversity Antenna DSM2 DSMX Compatible

Product Specification:

• Type: DSMP Full Range Receiver with Diversity Antenna
• Number of Channels: 6
• Modulation: DSMX / DSM2 compatible
• Band: 2.4 GHz
• Dimensions: 30 (L) x 17 (W) x 11 (H) mm
• Weight: 4.54g
• Voltage Range: 3.9 - 8.5 V

For more information about the product, please refer to the RCgroups discussion forum: https://www.rcgroups.com/forums/showthread.php?3496899-The-official-Lemon-2020-receiver-thread-NEW-USERS-read-first-8-posts-%29

User Manual: We thank John [JJ604 RCgroups] for helping us with the user manual. You can access the manual via the following link: http://www.lemon-rx.com/index.php?route=information/information&information_id=7

Dual Antennas: The DSMP Full Range Receiver features true diversity dual antennas with an independent processor that monitors signals on both antennas. This allows for installation in two different locations with different orientations. With this feature, a satellite is no longer needed for receiver diversity, which greatly reduces weight and increases overall reliability. The photo below shows the diversity receiver for an end-pin stabilizer. The same diversity receiver is used in this product.

Other Features:

• Antennas can be extended for carbon fuselage/metallic structure installation
• FailSafe for all channels via the press of a button
• DSMX Satellite port

Understanding the Receiver: Shown below is a DSMX 6-channel non-diversity receiver.

Binding:

1. Plug the bind plug into the receiver.
2. Provide power to the unit. The LED flashes quickly.
3. Enable bind mode in the transmitter and ensure a distance separation of 2 meters from the receiver. A solid LED light means binding is completed.
4. Remove the bind plug.

FailSafe Enable: Please refer to this video showing a 10-channel receiver: https://www.youtube.com/watch?v=FyW1v12dv_k

1. Bind the receiver and do not remove the bind plug.
2. Upon successful binding, set the transmitter sticks/channels to the desired failsafe position.
3. Press the side pushbutton to save the current position in failsafe mode.
4. Check for a green light on. A green light on indicates failsafe is successfully enabled.
5. Remove the bind plug and power cycle the receiver.

FailSafe Disable: Please refer to this video showing a 10-channel receiver: https://www.youtube.com/watch?v=xpb1tvBvA2E

1. Bind the receiver and do not remove the bind plug. If the green light is on, Failsafe is currently enabled, and pressing the side pushbutton will disable Failsafe.
2. Check for a green light off, which indicates Failsafe is disabled.
3. Remove the bind plug and power cycle the receiver.

Important Notes:

1. This product is not a Spektrum DSMX or DSM2 product, nor is it a copy of one. The Spektrum, DSMX, and DSM2 brand is a trademark of Horizon Hobby, Inc.
2. This product is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.
3. Lemon Rx products are tested to be compatible with Spektrum's DSMX and/or DSM2 product (Spektrum, DSMX, and DSM2 are registered trademarks of Horizon Hobby, Inc.).