Description
Servos are supplied with UNIVERSAL connectors which are compatible with all name-brand systems.
Product Description
The metal D-625MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
This is the upgraded version of the HS-5665MH
Features
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
Accessories
- Metal Gears Set | Link |
- Metal / Plastic 1st Gear Set | Link |
- Plastic Case Set | Link |
- Applicable Horns | Link 1 • 2 • 3 |
D625MW Servo Specifications
Performance Specifications | |
Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V ~ 7.4V |
Speed (Second @ 60°) | 0.20 ~ 0.15 ~ 0.13 |
Maximum Torque Range oz. / in. | 87 ~ 122 ~ 139 |
Maximum Torque Range kg. / cm. | 6.3 ~ 8.8 ~ 10.0 |
Current Draw at Idle | 30 mA |
No Load Operating Current Draw | 500 mA |
Stall Current Draw | 2,650 mA |
Dead Band Width | 2 µs |
Physical Specifications | |
Dimensions (Inches) | 1.59 x 0.77 x 1.48 |
Dimensions (Metric) | 40.6 x 19.8 x 37.8 |
Weight (Ounces) | 2.11 |
Weight (Gram) | 57.0 |
Circuit Type | 32bit Programable Digital |
Motor Type | 3 Pole Metal Brush Ferrite |
Gear Material | Metal |
Bearing Type | Dual Ball Bearing |
Output Shaft (type / Ømm) | H25T |
Case Material | Plastic |
Dust / Water Resistance | N / A |
Connector Gauge (AWG) / Strand Count | 22 / 60 |
Radio Control Applications | |
Parkflyer | N / A |
Sport Plane | 12 - 15 lbs. |
Sailplane | 2 meters and up |
3D Performance | 12 - 15 lbs. |
Scale | 12 - 15 lbs. |
Electric Helicopter | 600mm |
Gas Helicopter | 50-59 Class |
On Road | 1/10th |
Monster Truck | 1/10th |
Buggies | 1/10th |
Truggies | 1/10th |
Short Course / Truck | 2 meters and up |
Crawlers | N / A |
Sail Boat | = >1M & Scale |
Power Boat | 1/10th |