Description: Brand name: HAKRC  Item name: E50AX4 BLHeli_32 ESCSize: 36*36*6mmPackage Size: 62*58*17mmFixed hole distance: 30.5*30.5mm/Φ3mmWeight: 16gPackage weight: 40gContinuous current: 50AMaximum current: 65A (sustainable 10S)Input voltage: 3--6S  Features:-The HAKRC 50A ESC...

Description: Brand name: Hakrc  Item name: 30A 4 In 1 ESC Con. Current: 30A Peak Current: 35A Working voltage: 2-5S BEC: 5V/3A Main control chip: EMF8BB21F16G Operating frequency: 48MHz Firmware:...

Name MAMBA 306 Dshot1200 4IN1 ESC 30A 6S Product Size 27×35×6.4mm Weight 6.6g Describtion INPUT VOLTAGE: 2~6S Lipo (7.4V~25V) CONTINUE CURRENT: 30A×4 BURST CURRENT: 35A (10S) BEC: NO SOFT: Dshot300/600/1200...

Velotech Magic USB programming tool is based on the design of Arduino USB linker. ESCs based on Atmel MCU and programmed with SimonK bootloader can be used with this tool...

Spedix round 12A ESC flashed with SimonK program for 250-300 size multirotors. It is designed to fit and hide in the arms of Spedix S250 quadcopter and hexacopter. This ESC...

This ESC performs excellently with most motors. However, due to the limit of SimonK program, we do not recommend this ESC for those big pancake motors with large number of...

This is one of the best multirotor ESCs we have tested: quick response, smooth throttle, low running temperature, and high reliability. There is no need to cut the signal wire...

Magic Mini is a series of Velotech miniature ESCs to fit limited space in small multirotors, inheriting the great features and high reliability of the Magic ESCs. Velotech Magic series...

This ESC is flashed with BLHeli program, ideal for budget multirotor projects. Specifications: Support batteries: 2-4 Cells Weight: 22g (0.8oz) Dimensions: 41x25x7mm BEC Output: 2A @5V Continuous Current: 20A Maximum...

If you are following the trends in the multirotor community, you should have heard about the new BLHeli_S firmware. Currently there are not many ESCs that support this new firmware....

Spedix IS30 30Amp ESC BLHeli_S DSHOT Mainstream ESCs used in FPV racing quads are equipped with MOSFET of 3.3x3.3mm. MOSFETs of these dimensions are typically lower in efficiency and reliability....

 30 amp esc for multirotor with servo plug.

BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there...

Spedix 4 in 1 DShot 1200 BLHeli GS 35A ESC Spedix is known for making amazing ESCs, and they've done it again with the GS 35a ESC. With 32 bit...

Spedix IS20 2-4S 20A 4 in 1 BLHeli_S ESC with DShot supported, 20x20mm mounting M2 holes. This small ESC is designed for small 80-130 size brushless quads. The ESC alone...

The Aikon SEFM 20A is a new generation ESC that uses a variety of bleeding edge technologies in hardware and firmware.The second BLHeli_S offering from Aikon, designed to be compact...