Description
Servos are supplied with UNIVERSAL connectors which are compatible with all name-brand systems.
Product Description
The titanium D-950TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
Accessories
- Titanium Gears Set | Link |
- Metal / Karbonite 1st Gear Set | Link |
- Plastic / Aluminum Case Set | Link |
- Applicable Horns | Link 1 • 2 |
D950TW Servo Specifications
Performance Specifications | |
Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V ~ 7.4V |
Speed (Second @ 60°) | 0.23 ~ 0.17 ~ 0.14 |
Maximum Torque Range oz. / in. | 292 ~ 403 ~ 486 |
Maximum Torque Range kg. / cm. | 21.0 ~ 29.0 ~ 35.0 |
Current Draw at Idle | 30 mA |
No Load Operating Current Draw | 500 mA |
Stall Current Draw | 6,200 mA |
Dead Band Width | 1 µs |
Physical Specifications | |
Dimensions (Inches) | 1.57 x 0.79 x 1.50 |
Dimensions (Metric) | 40.0 x 20.0 x 38.0 |
Weight (Ounces) | 2.4 |
Weight (Gram) | 68.0 |
Circuit Type | 32bit Programable Digital |
Motor Type | Coreless Metal Brush |
Gear Material | Titanium |
Bearing Type | Dual Ball Bearing |
Output Shaft (type / Ømm) | H25T |
Case Material | Plastic / Aluminum |
Dust / Water Resistance | Splash Proof |
Connector Gauge (AWG) / Strand Count | 20 / 80 |
Radio Control Applications | |
Parkflyer | N / A |
Sport Plane | > 40% |
Sailplane | 2 meters and up |
3D Performance | > 40% |
Scale | > 40% |
Electric Helicopter | N / A |
Gas Helicopter | N / A |
On Road | 1/8th |
Monster Truck | 1/8th |
Buggies | 1/8th |
Truggies | 1/8th |
Short Course / Truck | 1/8th |
Crawlers | 1/8th |
Sail Boat | = >1M & Scale |
Power Boat | N / A |